Why Isn’t My iPhone Charging?
When you check back later, your iPhone still hasn’t charged even though you plugged it in or placed it on a wireless charger. What took place? Numerous things can go wrong. Let’s examine a few of the most typical problems with iPhone charging and offer some solutions. Below Steps to Fix Why Isn’t My iPhone Charging?
Test With Known Good Parts
A basic troubleshooting technique is “swapping with known good parts.” Replace any item that you suspect isn’t functioning in your setup with a fresh or well-established part that is equivalent.
Do you have trouble charging? Replace your outdated cable with a new one. If the new cable charges successfully, the old cable was the source of the issue.
You can repeat the procedure with any part of the setup, such as the iPhone itself (check to see if you can charge it with your charger if you borrow someone else’s iPhone) and the USB power source that you’re using. Try using a different outlet, USB hub, wall adapter, or computer USB port.
Beyond that basic technique, here’s a deeper look at some other things you can try.
Restart Your iPhone
Programming errors or defects might cause Apple’s iPhone software to become confused regarding charging processes at times. That program occasionally crashes and becomes unusable. Restarting your phone is the best temporary solution for this.
You may use the Control Centre to restart an iPhone running iOS 18. To access the Control Centre, simply slide it open, then press and hold the Power icon located in the upper-right corner. It will take a time for the “Slide to Power Off” screen to appear. To turn off the phone, slide your finger across the screen.
Simply navigate to Settings > General > Shut Down or push the Power button until the “Slide to Power Off” prompt appears if your iPhone is running earlier software. If the problem persists, we have a tutorial that explains how to restart any iPhone.
Hold down the Side button until the Apple logo appears in the centre of the screen after the screen turns black. Try charging the phone after it has done booting up to see if it works.
Check to check if there are any iOS (iOS) updates available for your iPhone after restarting, since they could potentially resolve the charging problem. See the process below to accomplish it.
Update Your iPhone’s Operating System
Errors may be incorporated into the iPhone’s charging control software. Apple occasionally finds these errors and releases updates to address them. To take use of these, simply upgrade your iPhone.
The caveat is that to update, your iPhone’s battery needs to be at least 60% charged. Apple has to do this because updating your phone while your battery is dead can damage it.
Here’s how to upgrade your iPhone if the battery life is acceptable to you: To check if there is an iOS software update available, navigate to Settings > General > Software Update. If so, carry out the update, give the phone a chance to restart, and then give charging a second go.
Check Your Charging Cable
It’s time to start investigating possible hardware issues if updating and restarting your phone didn’t resolve the issue. You might charge your iPhone with a Lightning or USB-C cable, depending on the model.
Regardless of the cable you choose, examine its full length as well as both ends, and ask yourself the following questions to determine its condition:
Are the connectors on the cable frayed or damaged?
Is there somewhere along the cable where bare wires protrude from the insulation?
Is there a sharp bend or kink in the cable?
If any of the questions have a “Yes” response, discard the damaged cable with other electronic debris and get a new one.
The charging circuit is disrupted and the iPhone will not charge correctly when the wires inside a Lightning or USB-C cable break. Because Apple’s Lightning charging cords are composed of a pliable, rubberised plastic that deteriorates over time, this is an especially prevalent issue.
You may also examine the connector’s gold-colored contacts on a Lightning cable. Are they discoloured or dirty? If so, you can remove the debris by rubbing a regular pencil rubber over them. The rubber has adequate abrasive power to remove dirt without causing any harm to the metal connections. Ensure that you tidy up.
Check Your iPhone’s Charging Port
Daily usage of an iPhone can lead to the accumulation of dust and pocket lint in the Lightning or USB-C port on the bottom of the device, particularly if the phone is routinely stored in a trousers pocket. The accumulation of lint physically prevents the charging wire from fully inserting and establishing a secure connection.
Using a tiny, non-metal tool like a wooden or plastic toothpick, you can clean out lint from your iPhone’s charging connector. However, because there is more room to manoeuvre with a Lightning port than a USB-C port, this is considerably easier. While this method is effective, it is a little dangerous and may cause harm to the tiny connector pins inside the iPhone. Take the iPhone to an Apple Store for servicing if you’re apprehensive about performing this yourself.
To get rid of the lint, don’t shoot compressed air into the charging port. Apple does not advise doing this since it may result in harm or other issues.
Check Your Charging Adapter or USB Power Source
For iPhones to charge within a decent amount of time (a few hours), a particular quantity of electricity from a USB source is required. An genuine Apple wall adapter is the most dependable power supply. Prior to the iPhone 12 and later models, Apple included these in the packaging, however they were later taken out.
To get technical, in order to charge an iPhone effectively, a charger must deliver at least 1 ampere, or “A” or “Amps” for short. iPhones linked to USB ports on laptops, keyboards, hubs, or outdated chargers frequently don’t give enough current (many only provide 0.5A or less, or 500mA), hence the iPhones will charge very slowly. It may not deliver enough power to charge the iPhone battery at all if the screen is lighting up or if the device is being used while connected to one of these low-current sources.
The iPad charger is a great tool for charging iPhones; in fact, it can charge an iPhone more quickly than the standard iPhone charger made by Apple. This is as a result of the iPad wall adapter’s higher current output in amps. Generally speaking, consumers don’t have to worry about overpowering their iPhones when using USB power sources because the circuitry within the device are designed to withstand the extra power.
Check Your Wireless Charging Device
Wireless charging is supported by every iPhone released since 2017 (including the iPhone 8 and iPhone X). You need a specific wireless charging pad or surface that complies with the Qi wireless charging standard in order to use wireless charging. Additionally, wireless MagSafe charging—which requires Apple’s MagSafe cables—was debuted with the iPhone 12.
If you have a wireless charging device available and you’re having problems charging your iPhone using a Lightning or USB-C cable, this can be an excellent temporary workaround.
To charge properly with a wireless pad or base, your iPhone needs to be centered in the middle of the charging area, which can vary by device. Part of what is so great about MagSafe is that the charger snaps to the perfect position, so you don’t need to worry about getting it right if you have a MagSafe wireless charger.
If wireless charging doesn’t work, try charging with a cable (see sections above) or with a different wireless charging pad
Related Post
